Genuine Riccar Vacuum Bags

Bags to fit Riccar UPRIGHTS models
100, 200, 300, 500, 600, 700, 800, 2000,
and all 4000 series
Genuine pkg of 6 for $ 9.99

Call Toll Free
1 866-409-1818

Carpet / Vacuum Scents

Bags to fit Riccar models 8000 Series
Genuine pkg of 6 for $ 9.99

Cloth Hepa Bags to fit all
Riccar supralite upright models
Hepa bags
Genuine pkg of 6 for $ 15.99

Riccar Radiance upright models
Cloth Hepa bags
Genuine pkg of 6 for $ 15.99

Riccar Brilliance Cloth
Hepa bags
Genuine pkg of 6 for $ 15.99

Riccar Vibrance upright models
Cloth Hepa bags
Genuine pkg of 6 for $ 15.99

Riccar Canister Bags
models 1500, 1700, 1800
Hepa Bags
Genuine pkg of 6 for $ 15.99

Changing The Vacuum Bag on your Riccar 100-800, 2000 and 4000 Series

Changing your vacuum bags for this series are pretty straight forward on this Riccar series., but there are a few tips and information I would like to share with you. Your vacuum cleaner came with Riccar's Ultrafiltration microline bags which are a high grade paper bag with a micro filter fused to the inside of the paper bag making it 6 times better filtration than standard paper vacuum bags

On top of the bag door look for the cut out to place your hand on the older models 2000 4000 series just grasp with your hand and pull straight out removing the bag door on the newer models 100-800 series Riccar has added a release button to unlock the bag door from the main body on those models just depress the button and pull bag door from the main body and set aside

With the bag door set aside reach in with your two hand place your fingers behind the vacuum bag all the way behind the cardboard collar while placing your thumbs in front of the bag pressing in locating the intake tube. By pulling out behind the bag cardboard collar and pushing in with your thumbs against the intake tube the Bags should slide off of the intake sometime a slight twisting motion will help when off you can flip up the dust seal on the old bag to plug the dirt from puffing out

Inserting your new vacuum bag most important things are to make sure the bag is all the way on the intake tube with the cardboard collar flush against the back of the bag housing and that the bottom and the sides are tuck in the bag housing andno part of the bag is keeping the bag door from sealing to the bag
housing when in place if not you will lose suction when vacuuming. I like to lower the handle all the way in the down position when putting in a new bag you can do this by tapping on your foot release pedal In this position you can use gravity when placing you paper bag on the bag tube pushing straight down on the bag until the bag collar is flush with the back of the housing,

Raise the handle back up line the bag door with the slots at the bottom of the bag housing and close

Changing The Vacuum Bag on your Riccar 8000 Series

Changing The Vacuum Bag on your Riccar Supralite

Changing The Vacuum Bag on your Riccar Radiance

Changing The Vacuum Bag on your Riccar Brilliance

Changing The Vacuum Bag on your Riccar Vibrance

Changing The Vacuum Bag on your Riccar 1500 1700 1800 Canister